Fujitsu semiconductor (Shanghai) Co., LTD, published today, the next generation single chip 2 G / 3 G / 4 G MB86L11A transceiver.该款多模多频芯片支持LTE（FDD和TDD）、HSPA+、This much model more frequency chip support LTE (FDD and TDD), HSPA +,WCDMAWCDMA、GSM、EDGE、EDGE-EVO、CDMA以及TD-, GSM, EDGE, EDGE-EVO, CDMA and TD-SCDMASCDMA等所有模式。All patterns, etc.新品样片将于2012第二季度开始供货。New product samples in 2012 will be the second quarter began to supply.

“富士通MB86L11A具有先进的性能，且功耗低、占位面积小、API灵活变通，可降低设备的总成本并加快新产品上市时间。如果无线设备供应商计划在各种频段和模式组合下引入带漫游功能的区域设备和全球设备，富士通的这款新收发器将为他们解决重大难题。”"Fujitsu MB86L11A with advanced performance, and low power consumption, occupied the area is small, API nimble, and can reduce the total cost of the equipment and speed up the new product time-to-market. If wireless equipment suppliers in all kinds of frequency and plan pattern composition with roaming the paper introduces the function of regional equipment and global equipment, Fujitsu of this new transceiver will solve big problems for them."富士通半导体亚太区市场部副总裁郑国威先生表示。Fujitsu semiconductor asia-pacific markets ZhengGuoWei vice President said Mr.

图：MB86L11AGraph: MB86L11A

下一代 MB86L11A 2G/3G/4G收发器The next generation of MB86L11A 2 G / 3 G / 4 G transceiver

MB86L11A 2G/3G/4G多模多频收发器具有支持电流损耗和RF参数的基准性能。MB86L11A 2 G / 3 G / 4 G multimode multi-frequency transceiver instruments have support current loss and RF parameter of the benchmark performance.采用小封装的新品具有许多创新特性，包括强化功率控制、包络跟踪（ET）和天线谐调（AT）功能。The small encapsulates the new product has many innovative features, including strengthening power control, envelope tracking (ET) and antenna humorous (AT) function.包络跟踪技术极大地降低了无线电系统的功耗，同时还能改善发射机效率。Envelope tracking technology greatly reduces the radio system power consumption, also can improve the efficiency of the transmitter.天线谐调则优化了天线的整体辐射功率输出。Antenna is optimized the antenna of humorous overall radiated power output.这两个特性将优化移动设备的电池寿命。The two characteristics of mobile devices will optimize battery life.

高级编程接口（API）不仅缩短了工厂量产校准时间，还提供灵活变通的端口映射并增加了定制关键绩效指标（KPI）。Senior programming interface (API) not only shorten the volume production factory calibration time, also provide flexibility of port mapping and increases the custom of key performance indicators (KPI).除此以外，MB86L11A还采用了富士通首创的SAW-less体系结构，可节省外部低噪声放大器（LNAs）。In addition, MB86L11A also adopted the Fujitsu pioneering SAW-less system structure, may save the external low noise amplifier (LNAs).

MB86L11A还具有其他特性，包括发射器上的8个RF输出、IC上的9个直接RF输入和6个分级RF输入，可更为灵活地为不同市场提供所需要的映射端口和频段。MB86L11A also has other properties, including transmitters on eight RF output, IC nine on direct RF input and six grading RF input, but even more flexible for different market to provide needed mapping port and frequency band.该收发器使用公开标准MIPI DigRFSM基带接口，具有DigRF 4G和DigRF 3G接口，可连接既存的2G/3G基带平台和最新的多模式4G基带。The transceiver use open standard MIPI DigRFSM baseband interface, with DigRF 4 G and DigRF 3 G interface, can connect the existing 2 G / 3 G baseband platform and the latest much mode 4 G baseband.

本芯片支持全球范围内的FDD和TDD带域，包括1-21、23-25和33-41。This chip support global FDD and TDD with domain, including 1-21 and 23-25 and-MB86L11A与富士通早期LTE多模多频收发器一样，支持高达20MHz带宽的2G/3G/4G网络。MB86L11A and Fujitsu early LTE multimode multi-frequency transceiver, support as high as 20 MHz of bandwidth 2 G / 3 G / 4 G network.路线图上将来的收发器包括4G LTE优化芯片、3GPP Release 10以及波载聚合兼容的单RFICThe road map of the future transceiver including 4 G LTE optimization chip, the 3 GPP Release 10 and the wave in polymerization compatible single RFIC解决方案solutions。

富士通 MB86LXXX家族Fujitsu MB86LXXX family

富士通于2009年开始为2G/3G网络提供业内首创SAW-less收发器MB86L01A (http://www.Fujitsu began in 2009 to 2 G / 3 G network to provide the first SAW-less transceiver MB86L01A (http://www.fujitsufujitsu.com/cn/fss/news/archives/2009/0916.html)。.com/cn/fss/news/archives/2009/0916.html)。2011年2011 years，富士通发布了业内首个3G和LTE SAW-less收发器MB86L10A，成功地嵌入软件保护器、, Fujitsu released the first 3 G and LTE SAW-less MB86L10A transceiver, successfully embedded software protector,平板电脑Tablet computer和多模2G/3G/4GAnd multimode 2 G / 3 G / 4 G智能手机Smart phones。. 而去年11月推出的MB86L12A是富士通第三代2G/3G/4G SAW-less收发器，支持升级了的MIPI DigRF标准，并已经做好量产准备（http://www.fujitsu.com/cn/fss/news/archives/2011/1024.html）。And last November launch of the MB86L12A Fujitsu is the third generation 2 G / 3 G / 4 G SAW-less transceiver, support the upgrade MIPI DigRF standard, and has been ready for mass production (http://www.fujitsu.com/cn/fss/news/archives/2011/1024.html).富士通MB86LXXX家族收发器由多个基带供应商部署到世界各地，至今为止出库量已达数百万。Fujitsu MB86LXXX family transceiver by several baseband supplier deployed to all over the world, so far the outbound quantity has millions.此次最新推出的下一代MB86L11A 2G/3G/4G收发器的加入延续了MB86L10A和MB86L12A的成功，同时还强化了富士通家族收发器的精巧设计和最先进的特性，受到设备制造商的广泛欢迎。The latest is the next generation of MB86L11A 2 G / 3 G / 4 G transceiver to join MB86L10A and continued the MB86L12A success, but also to strengthen the Fujitsu family transceiver elaborate design and the most advanced characteristics, widely welcomed by equipment manufacturers.

郑国威先生最后表示：“富士通的多模多频单芯片收发器家族代表了该领域的最新发展水平，MB86L11A的推出进一步扩展了该家族的产品序列。未来，富士通还将继续努力，开发更多性能先进、功能卓越的产品，不断满足消费者和制造商的需求。”Mr. ZhengGuoWei finally said: "more than the Fujitsu model more frequency single chip transceiver family represents the latest development of the field level, MB86L11A launch further extend the family of products series. The future, Fujitsu will continue to develop more advanced performance, the function is outstanding products, and continuously meet the needs of consumers and manufacturers."